Dji Phantom 2 Vision + User Manual download pdf (Page 16)

Power on the camera and range extender. Note: (Place the camera power switch to the ‘WIFI ON’

position).

Approximately 30 seconds later, press the reset button on the range extender with a thin object until the

Wi-Fi signal indicator turns off. The range extender will then restart automatically.

Approximately 30 seconds later, the Wi-Fi signal indicator should start to blink green, which indicates the

range extender is now ready to be bound.

Find and select the Phantom_xxxxxx via the Wi-Fi list on the mobile device to connect the range extender.

(Fig.1) Run the DJI VISION App->Settings->General->Binding. (Fig.2) Select ‘Scan the QR Code’ to scan

the camera QR code on the product packaging. (Fig.3) Get the camera SSID (E.g. FC200_0xxxxx) and the

MAC address, select the tick on the top right corner. The range extender should automatically

restart. The binding procedure is now complete.

Fig.1 Fig.2

（

QR code is only for example.

）

Reset Button

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

No comments

Dji Phantom 2 Vision + User Manual Page 16